(Tutorial) How to update the iDrive software on BMW F30 Premium Navigation CIC

Today we’re gonna cover the procedure that allows you to upgrade your navigation system’s maps to the 2014-1 version. In order to do so, you’ll first need the DVD set from your local BMW dealership and an FSC code that allows you to install them. This FSC code is obtainable from your dealer, based on your car’s VIN number.

So, in order to install the maps, first you must turn on your engine. During the whole process the engine must be kept running, to avoid any problems. You should also know that the entire operation will take a couple of hours (less if you’re using USB drives) so make sure you have enough gas in the tank.

After starting the engine, insert the first DVD into your car’s system. The on-board computer will detect the new maps and ask for the FSC code that you’ll then insert using the iDrive controller.

From here on you’ll just have to wait for the disc to be copied. This will take a couple of hours but you will need to come back in the mean time to introduce the next disc. After the third DVD is copied, the system will reboot.

That’s the conventional way to do it. Another way is to used USB drives. These can be provided by the dealership or you can copy the contest of your DVDs on USB devices using a PC or Mac. This way is faster as the USB read speed is faster than on a DVD and it cancels out the disk read errors.

To do so you can either use one USB flash with over 16 GB of storage (so that all 3 DVDs fit on it) or 3 drives of at least 8 GB that you can interchange afterwards. The disks have to be FAT32 formatted.

Leave a comment using Facebook
(Visited 616 times, 2 visits today)
By | 2016-11-17T19:21:47+00:00 September 29th, 2016|Categories: BMW Coding|0 Comments

Leave A Comment